300-25 STANNOL Flux 2.5 Liter
Description
Non-activated flux according to DIN EN 29454-1 type 1.1.1 (DIN 8511, F-SW31). The flux residues are non-corrosive, according to DIN 8527 F-SW32. Stannol 300-25 also complies with DIN IEC 68 Part 2 - 20 6.6.1.
Stannol Solder Flux 300-25 is a ready-to-use flux for wave and drag soldering systems and has been specially developed for use in the electronics industry for soldering printed circuits.
It does not contain any activators or other substances that cause ionic contamination. It has very good wetting properties on surfaces that are easy to solder. Stannol soldering flux 300-25 is therefore used where the highest demands are placed on corrosion resistance and safety. The flux residues remaining after the soldering process are dry, plastic and transparent.
Technical data
- Appearance: Amber colored liquid
- Density (20°C): 0.846 g/cm3
- Flash point (closed crucible): 13°C
- Ignition temperature: 425°C
- Solids content: 25%
- Acid value: 43 mg KOH/g
- Copper level test: passed
- Silver chromate paper test: passed
- Halogenide content: none
- Thinner: Stannol VD-500
Hazard pictograms
Information:
- Dangerous goods, transportation costs may be higher than stated.
- Prices excl. VOC
Additional information
| Flux | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||
| LEDs | ||||||||||
|
|
||||||||||
Data sheets
| TDS_300-25-EN | PDF(74.51 KB) |
|---|---|
| TDS_300-25-ENG | PDF(72.07 KB) |
| Main catalog_EN | PDF(8.18 MB) |
| MSDS_300-25 | PDF(210.45 KB) |
Accessories
-
323001
Bar solder ECOLOY, TSC305 Sn96.5Ag3.0Cu0.5 (price/kg)CHF 155.0096 Available immediately -
331035
Ecoloy ingot solder Sn99.3Cu0.7 - TC (per kg)18 Available immediately -
14S-B30-65
ESD dissipative brush, hard, 30 x 65mmCHF 19.903 Available immediately -
186-93080-11
ESD conductive hard brush, nylon, 80mm (yellow)CHF 26.601 Available immediately -
830336
Fine Fluxer empty 8mlCHF 16.208 Available immediately -
EFLU400DB
FLU flux cleaner 400ml with brushCHF 18.00117 Available immediately -
705.400.000
Flux-off, removes residues of soldering flux 400ml sprayCHF 9.8030 Available immediately -
ES835BE
Flux-Off® Rosin Flammable Flux Remover Brush Clean with Brush 200mlCHF 18.00Available to order -
424552
Solder wire solid, Sn63Pb37, 3mm, 4000gAvailable to order -
419024
Solid solder wire, Sn96.5Ag3Cu0.5 - TSC305, 2 mm, 4000gAvailable to order -
419027
Solid solder wire, Sn96.5Ag3Cu0.5 - TSC305, 3 mm, 4000gAvailable to order -
570204
Solder wire Trilence 3505, Sn96,5Ag3Cu0,5 - FLOWTIN TSC305, RE L1, 0.7mm, 500gCHF 164.5020 Available immediately -
820040
Pellets type Ecoloy Sn96.5Ag3Cu0.5 - TSC305 à kg16 Available immediately -
310502
Sn99Cu1 Ecoloy ingot solder (per piece)CHF 23.4088 Available immediately -
ESYR20ML
Syringe, empty tip, 20ml, printed scale, (PU=10pcs.)CHF 17.502 Available immediately -
860040
Stannol Universal Cleaner Flux-Ex Oven, 1 literCHF 22.306 Available immediately -
308054
Stannol SnGe1 Anti-Oxidation Pellets à kgCHF 70.001 Available immediately -
820035
TC Ecoloy pellets à kg27 Available immediately -
310501
TSC Ecoloy triangular bar extruded (per piece, approx. 250g)72 Available immediately -
164051
VD 500 - Thinner 2.5 Liter12 Available immediately
Similar products
-
164159
EF270 Flux 2,5l BidonAvailable to order -
860316
MULTIFIX 450-01 Fluxgel 5cc, 4mlCHF 18.70Available to order -
164164
WF130 Flux 25l BidonCHF 269.80Available to order -
164106
EF250 Flux 25l Bidon3 Available immediately -
165105
500-6B Flux pen 10mlCHF 12.5015 Available immediately -
165063
HX21 Fluxgel 10ccCHF 30.806 Available immediately -
164152
EF350 Flux 25l Bidon1 Available immediately -
114033
Flux soldering water no. 1V 50ml5 Available immediately -
830336
Fine Fluxer empty 8mlCHF 16.208 Available immediately -
CW8100
No Clean flux dispenser pen 9gCHF 12.201 Available immediately
We would be happy to advise you personally
Our technical support team will be happy to answer any questions you may have about our products. Our competent product specialists with project experience will accompany you conscientiously in your projects. It is important to us to offer our customers top service at all times.
