EF270 Flux 25l Bidon
Description
Low-solids no-clean flux of category 2.2.3.A according to DIN-EN 29454-1, type ORL0 according to EN 61190-1-1 and type ORL0 according to J-STD-004. Stannol EasyFlux 270 soldering flux was developed for wave soldering electronic assemblies and as a supplement to the Stannol EasyFlux range. The reduced solids content in combination with specially adapted halogen-free activation results in excellent wetting properties on a wide variety of surfaces (e.g. OSP, Ni/Au, HAL), even with lead-free solder alloys. This flux can also be used for other soldering processes such as selective and dip soldering.
Technical data
- No-Clean
- Low residue
- Resin-free
- Optimum solids content - fast wetting
- Perfect results with lead-free and lead-containing alloys
Areas of application
Stannol EasyFlux 270 is preferably used in spray fluxers. Foam fluxers can be used to a limited extent. The preheating temperature when entering the solder wave should be at least 90°C on the top of the PCB. This temperature ensures that the solvent evaporates and the flux is sufficiently activated. For lead-free soldering processes, the optimum preheating temperature may have to be determined on the basis of the thermal requirements. For selective soldering, the sprayed area should be preheated. Changes in the composition occur due to evaporation losses, so that a correction should be made by correct dilution. The titration method with the Stannol Mini Titration Set is recommended for this purpose. Corresponding instructions are included in the titration set.
Hazard pictograms
Information:
- Dangerous goods, transportation costs may be higher than stated.
- Prices excl. VOC
Additional information
| Flux | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||
| LEDs | ||||||||||
|
|
||||||||||
Data sheets
| Technical data sheet_EF330_EN | PDF(81.34 KB) |
|---|---|
| MSDS | PDF(94.26 KB) |
| Main catalog_EN | PDF(8.18 MB) |
| Overview table of fluxes STANNOL_EN | PDF(348.3 KB) |
| Overview table of STANNOL fluxes_ENG | PDF(345.97 KB) |
Accessories
-
323001
Bar solder ECOLOY, TSC305 Sn96.5Ag3.0Cu0.5 (price/kg)CHF 155.0096 Available immediately -
331035
Ecoloy ingot solder Sn99.3Cu0.7 - TC (per kg)18 Available immediately -
14S-B30-65
ESD dissipative brush, hard, 30 x 65mmCHF 19.903 Available immediately -
186-93080-11
ESD conductive hard brush, nylon, 80mm (yellow)CHF 26.601 Available immediately -
830336
Fine Fluxer empty 8mlCHF 16.208 Available immediately -
EFLU400DB
FLU flux cleaner 400ml with brushCHF 18.00147 Available immediately -
705.400.000
Flux-off, removes residues of soldering flux 400ml sprayCHF 9.8030 Available immediately -
ES835BE
Flux-Off® Rosin Flammable Flux Remover Brush Clean with Brush 200mlCHF 18.00Available to order -
424552
Solder wire solid, Sn63Pb37, 3mm, 4000gAvailable to order -
419024
Solid solder wire, Sn96.5Ag3Cu0.5 - TSC305, 2 mm, 4000gAvailable to order -
419027
Solid solder wire, Sn96.5Ag3Cu0.5 - TSC305, 3 mm, 4000gAvailable to order -
570204
Solder wire Trilence 3505, Sn96,5Ag3Cu0,5 - FLOWTIN TSC305, RE L1, 0.7mm, 500gCHF 164.5020 Available immediately -
820040
Pellets type Ecoloy Sn96.5Ag3Cu0.5 - TSC305 à kg51 Available immediately -
310502
Sn99Cu1 Ecoloy ingot solder (per piece)CHF 23.4083 Available immediately -
ESYR20ML
Syringe, empty tip, 20ml, printed scale, (PU=10pcs.)CHF 17.502 Available immediately -
860040
Stannol Universal Cleaner Flux-Ex Oven, 1 literCHF 22.306 Available immediately -
308054
Stannol SnGe1 Anti-Oxidation Pellets à kgCHF 70.001 Available immediately -
820035
TC Ecoloy pellets à kg25 Available immediately -
310501
TSC Ecoloy triangular bar extruded (per piece, approx. 250g)72 Available immediately -
164051
VD 500 - Thinner 2.5 Liter12 Available immediately
Similar products
-
165063
HX21 Fluxgel 10ccCHF 30.80Available to order -
CW8100
No Clean flux dispenser pen 9gCHF 12.201 Available immediately -
860316
MULTIFIX 450-01 Fluxgel 5cc, 4mlCHF 18.70Available to order -
165099
KOLOPASTE NR. 8 Fluxgel 30cc syringeCHF 24.504 Available immediately -
80006315
BM-5000 Flux 15ml bottle with brush capCHF 15.201 Available immediately -
164014
500-6B Flux 2,5l Bidon1 Available immediately -
164101
EF270F Flux 25l BidonAvailable to order -
860318
MULTIFIX 450-01 Fluxgel 10cc, 8mlCHF 20.40Not in stock -
CW8400
Chemtronics lead-free flux dispenser pen 9gCHF 14.9017 Available immediately -
164106
EF250 Flux 25l Bidon3 Available immediately
We would be happy to advise you personally
Our technical support team will be happy to answer any questions you may have about our products. Our competent product specialists with project experience will accompany you conscientiously in your projects. It is important to us to offer our customers top service at all times.
