Stannol 165018 Flux solder paste Contents 50 g F-SW 26
CHF 6.50 excl. VAT, plus shipping costs
Description
Stannol contact solder paste is a preparation of activated rosin resin in mineral fats, Stannol contact solder paste is a flux for soft soldering type 1.1.2.C according to DIN EN 23454-1 (F-SW26) for general soldering work. Stannol contact soldering paste is preferably used for soldering copper and copper alloys, nickel(!) and nickel alloys and is suitable for use in electrical engineering. Cable tinning, soldering of connections, shielding plates and repair of wires are examples of applications. It is not necessary to remove the flux residues as they do not have a corrosive effect.
Application
Solder joints should be clean and free of surface layers; sand them down if necessary. Apply Stannol contact solder paste to the metal to be soldered. Heat the solder joint with a suitable tool (e.g., a soldering iron) and apply solder. The solder joints should be at least 50 degrees hotter than the melting point (range) of the solder. Suitable solders include lead-containing solders, e.g., Sn60Pb40, Pb70Sn30, as well as the lead-free solders Sn99Cu1 and Sn96Ag4. For applications in electronics, flux residues must be removed. Stannol contact solder paste is not suitable for drinking water and service water pipes.
Additional information
| Solder pastes | ||||||
|---|---|---|---|---|---|---|
|
||||||
| Maintenance aids | ||||||
|
|
||||||
| LEDs | ||||||
|
|
||||||
We would be happy to advise you personally
Our technical support team will be happy to answer any questions you may have about our products. Our competent product specialists with project experience will accompany you conscientiously in your projects. It is important to us to offer our customers top service at all times.
