192W LED driver CV+CC 12V/16A, 3in1 dimming + Vo/Io adjustable on driver
CHF 87.40 excl. VAT, plus shipping costs
Description
MEAN WELL The ELG-200-12AB-3Y is a dimmable LED driver for use as a constant voltage or constant current source. A version with a ground connection on the cable is available. Current and voltage can be regulated on the LED driver.
The "AB" version of the ELG series is a combination of the previous "A" and "B" series. The power supply unit has a built-in 3in1 dimming interface and an additional current and voltage control option on the device. This allows the output voltage to be increased to compensate for voltage loss over long cables.
Control
- 0/1-10V signal (10V=100% Iout, 1V=10% Iout, 0V=Off)
- Resistance (100kΩ=100% Iout, 8kΩ =8% Iout,0kΩ=Off)
- 10V PWM signal (100% Duty Cycle=100% Iout, 10% Duty Cycle=10% Iout, 0% Duty Cycle=Off)
Dimming range
The dimming range is 8% to 100% in relation to the nominal power. For a good dimming result, we recommend utilizing the LED driver with at least 90%.
Technical data
- Can be used as a constant voltage and constant current source
- No load power consumption <0.5W
- Current and voltage adjustable on the driver
- Built-in 3in1 dimming function (0/1-10V, PWM control, resistance, dim-to-off)
- Service life >50,000 hours
- IP65 design, splash-proof
- Fully encapsulated in a metal housing
- Operating temperature range from -40°C to +70°C
- Dimensions 244 x 71 x 37.5mm (L x W x H)
Additional information
| LED constant voltage | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||||||||
| Maintenance aids | ||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
| LEDs | ||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
| More | ||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
Data sheets
| Data sheet ELG-200 series | PDF(944.83 KB) |
|---|---|
| Test Report ELG-200-12 | PDF(687.7 KB) |
| Installation instructions Mean Well LED driver | PDF(1.2 MB) |
| Carbon Footprint declaration ELG-200-V-AB | PDF(74.03 KB) |
Downloads
| 3D data ELG-200 series | Zip file (283.2 KB) |
|---|
Accessories
-
ICL-16R
Inrush current limiter (DIN rail version), 23ACHF 42.2096 Available immediately -
THB.387.AB3A
Round plug, 3p, pin+socket, screw connection, wire protection, D7-12mm, IP68CHF 11.00Available to order -
P16NP104MAB15
100K Ohm dimming controller linearCHF 16.0014 Available immediately -
DAP-04-S01
DALI to PWM converterCHF 47.401 Available immediately -
ESB001.LED.230VAC
Inrush current limiter (DIN rail version), 43A, ultra-compactCHF 65.7035 Available immediately -
KAA-4R4V-10S
4 channel KNX dimming actuator 0-10V / 1-10V, 10A per channel, with KNX SecureCHF 156.402 Available immediately -
SLIM-CBU-DALI
Signal converter CASAMBI to DALI or 0/1-10V, CASAMBI input, DALI or 0/1-10V outputCHF 88.301 Available immediately
Similar products
-
PWM-200-12DA2
180W LED power supply unit with PWM output 12V/15A, DALI2, AC PushCHF 101.4042 Available immediately -
PWM-200-12KN
180W LED driver with PWM output 12V/15A, KNXCHF 128.301 Available immediately -
HLG-240H-12B
192W LED driver CV+CC 12V/16A, 3in1 DimmingCHF 120.2020 Available immediately -
ELG-200-12B-3Y
192W LED driver CV+CC 12V/16A, 3in1 dimmingCHF 85.80Available to order
We would be happy to advise you personally
Our technical support team will be happy to answer any questions you may have about our products. Our competent product specialists with project experience will accompany you conscientiously in your projects. It is important to us to offer our customers top service at all times.
