40W Railway DC/DC Converter In: 16.8-137.5Vdc / Out 24Vdc / 2.5A
CHF 54.45 excl. VAT, plus shipping costs
Description
The RMD40/DR DC/DC converter for DIN rail mounting is designed for rail vehicles and transport applications and complies with all relevant standards: EN50155, EN50121-3-2, DB-EMV06, EN50124-1, EN50125-1, EN61373 1B, EN62368-1, EN45545-2. RDM75 covers an 11:1 input voltage range from 16.8VDC to 137.5VDC and provides an isolated and regulated 24V output with reinforced isolation system. Mounting on a base plate allows for a wide operating temperature range for class OT4+ST1&ST2 from -40°C to +85°C without power reduction. Input reverse polarity protection, inrush current limiting, 10 ms bypass time, remote control, and output OR-ing diode, and an efficiency of up to 92% round off the functionality of this fully railway-compliant plug-and-play device.
Technical data
- Fully EN50155 compliant, no external circuits
- Ultra-wide entrance area 12:1 reduces product variety
- Excellent efficiency, lowest power loss, full service life
- Full power up to +85° without heat sink, no derating
- Active input reverse polarity protection
- Active inrush current limitation - Network protection
- 10 ms bridging time over the entire input range
- Reinforced insulation, 5 mm air/creepage distances
- Trim output for long cable runs or for charging batteries
- Parallel and redundant operation
- 20% peak load capacity up to 90W for 10 seconds
- Remote (on/off) and DC OK with relay changer
Additional information
| DC-DC converter | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||
| LEDs | ||||||||||||||||||||||||
|
|
||||||||||||||||||||||||
| More | ||||||||||||||||||||||||
|
||||||||||||||||||||||||
Data sheets
| Data sheet RMD40-110-24SUW | PDF(1.38 MB) |
|---|---|
| Installation instructions RMD40-UW | PDF(1.67 MB) |
Downloads
| 3D data RMD40 | Zip file (1.25 MB) |
|---|
Similar products
-
RMD300-110-24SUW
300W Railway DC/DC converter In: 16.8-137.5Vdc / Out 24Vdc / 13.75ACHF 355.85Available to order -
RMD150-110-24SUW
150W Railway DC/DC converter In: 16.8-137.5Vdc / Out 24Vdc / 6.88ACHF 228.80Available to order -
RMD500-110-24SEW
500W Railway DC/DC converter In: 50.4-137.5Vdc / Out 24Vdc / 21ACHF 410.10Available to order -
RSD-60L-24
60W DC/DC converter, input 18...72V, output 24V/2.5ACHF 35.002 Available immediately
We would be happy to advise you personally
Our technical support team will be happy to answer any questions you may have about our products. Our competent product specialists with project experience will accompany you conscientiously in your projects. It is important to us to offer our customers top service at all times.
