
NTN-5K is an all-in-one device that combines AC/DC charging, DC/AC conversion and AC bypass in one device. External solar modules and Chargeurs chargers are also supported for integration into a solar system. The main features include five important highlights:
- Built-in high-performance AC-DC charger with 4520W and fast charging function
- Modular design with a 5KW module that allows flexible parallel connection of AC outputs up to 30KW (1+5 units) and highly flexible power expansion
- The chassis is designed in a 2U high housing for easy installation and quick mounting in a standard 19" rack
- Use 3 pieces of NTN-5K single-phase AC outputs to obtain a 3-phase, 4-wire AC output
- Provides comprehensive control and monitoring via the CMU2E, CM2E-R controller.
Other features include: instant peak power up to 10KW, integrated communication, adjustable output voltage/frequency/energy saving mode, full protections, PCB coating for dust/moisture/dirt resistance, remote ON/OFF, 5 years warranty and international certifications. Suitable for indoor backup power during power outages or in off-grid outdoor situations, e.g. homes, offices, warehouses, vehicles, boats, remote mountain areas, construction sites, etc.; suitable for powering lighting, computers, air conditioners, refrigerators, hair dryers, backup power appliances, power tools, etc.
-

NTN-5K-248
5kW DC/AC UPS inverter with charging and UPS function 40...66Vdc/230VacCHF 1’651.50Available to order -

NTN-5K-2380
5kW DC/AC UPS inverter with charging and UPS function 280...430Vdc/230VacCHF 1’651.50Available to order -

NTN-5K-224
5kW DC/AC UPS inverter with charging and UPS function 20...33Vdc/230VacCHF 1’591.10Available to order
Suitable for indoor emergency power supply during power outages or in off-grid outdoor situations, e.g. in households, offices, warehouses, vehicles, boats, remote mountain regions, construction sites, etc.

Features 5kW inverter:
- Multifunctional all-in-one device (AC-DC charger + DC-AC inverter for load + AC bypass for load)
- Built-in AC-DC high-power charger with up to 4520W
- DC-AC output with pure sine wave (THD<3%)
- Immediate peak power of up to 10KW for AC output
- Up to 6 units of the AC output can be connected in parallel to increase the output to up to 30KW (5+1 units)
- Uses 3 NTN-5K unidirectional AC outputs, configurable for 3Ø4W use
- -30~+70℃ ultra-wide temperature range, suitable for worldwide use or installation in enclosed spaces
- Built-in ON/OFF remote control
- Protective devices:
- DC input: reverse polarity protection, undervoltage warning and switch-off, overvoltage, battery overdischarge
- AC output: short circuit, overload, overtemperature
- Built-in Modbus or CAN bus communication monitoring
- Optional intelligent controls can be purchased:
- CMU2E (free-standing vertical mounting / rail mounting) or CMU2E-R (rack system installation)
- Dimensions (length x width x height): 460 x 211 x 83.5 mm
- PCB coating for basic protection against moisture/dust/dirt
- Certifications: CB / TUV / RCM / EAC / CE / UKCA / FCC
- Compatible with lead-acid or lithium batteries
- 5 year guarantee
Application:
