200W LED driver with PWM output 24V/8.3A, KNX
CHF 128.30 excl. VAT, plus shipping costs
Description
PWM-200KN is a 200W AC/DC LED converter with constant voltage output. Thanks to the integrated KNX interface, the driver can be programmed directly via ETS and controlled via the KNX bus. This eliminates the need for a KNX-DALI gateway.
KNX functions
CLO
The luminous flux of LEDs decreases over time as the diodes age. The CLO function (Constant Light Output) is used to continuously compensate for the
continuously compensate for the drop in luminous flux of the luminaire. Once set in the ETS, compensation takes place automatically
Staircase function
Times, brightness values and alarm functions can be programmed in the ETS
Scenes
Scenes can be combined with other KNX products such as actuators, KNX sockets, etc. This allows comprehensive scenes to be realized at the touch of a button
PWM frequency adjustable
In the ETS, the PWM frequency can be configured in the range from 200Hz to 4kHz. Problems with noise due to resonance frequencies or compatibility problems with LED light sources can be resolved in this way
Operating hours counter, consumption counter, temperature monitoring
Get total control over the LED power supplies used in the building. Find out how long the individual LED converters have been in operation, how much power the individual luminaires have consumed and whether the temperature is within the defined range
Technical data
- No load power consumption 0.5W
- KNX interface integrated
- Output voltage with PWM dimming with a high dimming frequency of up to 4kHz
- KNX Secure
- KNX functions such as operating hours counter, CLO, PWM frequency setting, staircase function etc. integrated
- Protection class II Driver without earth connection
- Plastic housing
- Operating temperature range from -40°C to +70°C
- Dimensions 195 x 68 x 39.5mm (L x W x H)
Additional information
| LED constant voltage | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||||||||
| Maintenance aids | ||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
| LEDs | ||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
| More | ||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
Data sheets
| Data sheet PWM-200KN | PDF(690.97 KB) |
|---|---|
| Test Report PWM-200-24KN | PDF(624.06 KB) |
| PWM KNX LED driver Operating instructions | PDF(4.56 MB) |
Accessories
-
KNX-20E-640
KNX power supply unit 30V/640mACHF 92.00379 Available immediately -
KNX-40E-1280D
KNX power supply unit 30V/1280mA with diagnostic functionCHF 195.5020 Available immediately -
KSI-01U
KNX USB interfaceCHF 157.501 Available immediately -
KSR-01IP
KNX IP routerCHF 372.90Available to order
Similar products
-
LCM-60KN
60W LED driver CC 500-1400mA, 2-90Vdc, KNXCHF 89.906 Available immediately -
PWM-200-24DA2
200W LED power supply unit with PWM output 24V/8.3A, DALI2, AC PushCHF 101.40222 Available immediately -
PWM-120-24KN
120W LED driver with PWM output 24V/5A, KNXCHF 112.004 Available immediately -
PWM-60-24KN
60W LED driver with PWM output 24V/2.5A, KNXCHF 83.704 Available immediately
We would be happy to advise you personally
Our technical support team will be happy to answer any questions you may have about our products. Our competent product specialists with project experience will accompany you conscientiously in your projects. It is important to us to offer our customers top service at all times.
