New in our range of protective coating sprays and potting compounds from Peters

ELPEGUARD protective coatings are used to protect and insulate assembled printed circuit boards so that they can meet higher requirements in terms of reliability and service life.

ELPEGUARD® SL 1307 FLZ/S protective lacquer sprays are used to protect and insulate electronic assemblies so that they can meet higher reliability and service life requirements. Due to the very good resistance to moisture and condensation water, excellent corrosion protection (e.g. electrochemical corrosion and migration) is possible.

• Base: Acrylate resins (AR)
• Fast physical drying
• Practical spray can: ideal for pilot and small series as well as for repair work
• SL 1307 FLZ/& tested by Trace Laboratories-East according to IPC-CC-830B and MIL-l-46058C
• UL approval for SL 1307 FLZ/& in accordance with UL 746E (UL File No. E80315)
• SL 1307 S complies with the requirements of IPC-CC-830B, MIL-I-46058C and UL 746E (fluorescence excluded)
• can be soldered through at soldering iron temperature for repair purposes or removed with thinner V 1307 FLZ and reapplied after completion of the work
• Very good resistance to ageing and yellowing
• Temperature application range -65 to at least +125 °C
• Very good TWT resistance (temperature change test): -40 to +150 °C or -65 to +125 °C
• Resistant in the 4-component gas test in accordance with DIN EN 60068-2-60 or BMW GS 95003-4
• Suitable for coating flexible circuits ("flex-to-install", bending stress only during installation)
• SL 1307 S (without fluorescent agent) particularly suitable for light electronics/LED technology

ELPECAST potting compounds protect and insulate electronics, sensor technology and lighting electronics from extreme climatic influences and aggressive media.

The potting compounds from ELPECAST are characterized by:

• Transparent and opaque potting compounds
• for high exposure to chemicals, underwater use, weathering and sunlight during outdoor use, non-flammability for safety-relevant applications, visual and dismantling protection, heat dissipation and much more.
• Heavy-duty / non-flammable settings with UL approval in accordance with UL 94
• Mercury-free

The polyurethane casting compound Wepuran is particularly suitable for lighting technology.

• Greatest variety in terms of viscosity, colors, processing/pot life, hardness/elasticity settings
• Temperature application range between -65 °C and 90 to 130 °C
• Bestseller Wepuran VT 3402 KK-NV for the LED industry
• Crystal-clear potting compounds with extremely high transparency and very good resistance to yellowing for demanding applications in lighting electronics / LED technology