News

New 48 Vdc Reel-to-Reel LED strips PF25-M/V128B: up to 16 m with a single power supply

The Reel2Reel LED strips PF25-M/V128B delivers a constant luminous flux over a length of up to 16 m from a single power source. It is dimmable and only 10 mm wide.

PF25 M128B

The LED strips PF25-M/V128B is a dimmable, flexible constant-voltage strip designed for 48 VDC. Thanks to a current-control IC, an optimized layout, and increased copper content, the luminous flux remains constant along the entire length—up to 16 m (M128B)—with a single power supply.

The strip is available in the M version (11.5 W/m) and the V version (18.5 W/m). It uses the KSF 2835 LED and achieves a luminous flux of up to 3,110 lm/m with a color rendering index of Ra >90.

Four Benefits of the PF25-M/V128B at a Glance

Constant Luminous Flux

Up to 16 m (M128B) with just one power supply—this reduces the amount of wiring required.

High color rendering

Ra >90 and MacAdam 3 ensure natural colors and a very narrow color tolerance.

Can be trimmed to any length

Cutting options in 6.25 cm increments allow for precise adaptation to the installation situation.

Simple assembly

The self-adhesive 3M VHB tape adheres to a variety of surfaces.

Technical Specifications for the PF25-M/V128B LED Flexible Strip

Operating voltage48 VDC, constant voltage
PerformanceM: 11.5 W/m, V: 18.5 W/m
Luminous fluxup to 3,110 lm/m
Color ReproductionRa >90
Color toleranceMacAdam 3
Service lifeTM-21 L80B10 @ Ts 85 °C: >102 kh
Max. length with a single feed-in pointup to 16 m (M128B)
Length of the flexible circuit board25 m without any breaks, no solder joints
Cut length6.25 cm
Width10 mm

Interested in the PF25-M/V128B?

We would be happy to advise you on the LED strips PF25-M/V128B and help you determine the right configuration for your project.

Latest posts