200W LED driver with PWM output 48V/4.17A, KNX
CHF 128.30 excl. VAT, plus shipping costs
Description
PWM-200KN is a 200W AC/DC LED converter with constant voltage output. Thanks to the integrated KNX interface, the driver can be programmed directly via ETS and controlled via the KNX bus. This eliminates the need for a KNX-DALI gateway.
KNX functions
CLO
The luminous flux of LEDs decreases over time as the diodes age. The CLO function (Constant Light Output) is used to continuously compensate for the
continuously compensate for the drop in luminous flux of the luminaire. Once set in the ETS, compensation takes place automatically
Staircase function
Times, brightness values and alarm functions can be programmed in the ETS
Scenes
Scenes can be combined with other KNX products such as actuators, KNX sockets, etc. This allows comprehensive scenes to be realized at the touch of a button
PWM frequency adjustable
In the ETS, the PWM frequency can be configured in the range from 200Hz to 4kHz. Problems with noise due to resonance frequencies or compatibility problems with LED light sources can be resolved in this way
Operating hours counter, consumption counter, temperature monitoring
Get total control over the LED power supplies used in the building. Find out how long the individual LED converters have been in operation, how much power the individual luminaires have consumed and whether the temperature is within the defined range
Technical data
- No load power consumption 0.5W
- KNX interface integrated
- Output voltage with PWM dimming with a high dimming frequency of up to 4kHz
- KNX Secure
- KNX functions such as operating hours counter, CLO, PWM frequency setting, staircase function etc. integrated
- Protection class II Driver without earth connection
- Plastic housing
- Operating temperature range from -40°C to +70°C
- Dimensions 195 x 68 x 39.5mm (L x W x H)
Additional information
| LED constant voltage | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||||||||
| LEDs | ||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
| More | ||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
Data sheets
| Data sheet PWM-200KN | PDF(810.25 KB) |
|---|---|
| Test Report PWM-200-48KN | PDF(630.45 KB) |
| PWM KNX LED driver Operating instructions | PDF(4.56 MB) |
Accessories
-
KNX-20E-640
KNX power supply unit 30V/640mACHF 92.00277 Available immediately -
KNX-40E-1280D
KNX power supply unit 30V/1280mA with diagnostic functionCHF 195.501 Available immediately -
KSI-01U
KNX USB interfaceCHF 157.50Available to order -
KSR-01IP
KNX IP routerCHF 372.90Available to order
Similar products
-
PWM-200-48BLE
200W LED driver with PWM output 48V/4.17A, CASAMBICHF 168.202 Available immediately -
PWM-200-48DA2
200W LED power supply with PWM output 48V/4.17A, DALI2, AC PushCHF 86.70149 Available immediately -
PWM-200-48
200W LED power supply with PWM output 48V/4.17A, 3in1 dimmingCHF 78.705 Available immediately
We would be happy to advise you personally
Our technical support team will be happy to answer any questions you may have about our products. Our competent product specialists with project experience will accompany you conscientiously in your projects. It is important to us to offer our customers top service at all times.
